This is the exhaust I made for my car on very long night. I started around 6 pm and rolled home around around 5 am. It was made from cut 3 inch mandrel U-bends and 3 inch aluminized pipe. I cut, fit and tacked everything together on the car, then removed it and welded it up on the floor. I just barely had enough room to go over the axle. The down pipe is 2.25" stainless with a 2.5" stainless flex section. I plan on building a 3" downpipe soon. Just need to get around to it. only took me 3 months sitting around with all my Digi I parts to get that installed. Click on the pictures for larger size.
