Day 3 Of Parkers 16v Lysholm build up
Finally got the stuff back from the powder
coating place, here are the pictures of the individual parts.
Throttle Body adaptor for the BBM 16 limited kit.
Rear Motor Mount
Lower Intake
Charger Mounting Bracket
Alternator Pulley, Idle air inlet (for ISV) and water outlet on side of head from left to right
Valve cover for the 16v Motor
Upper intake manifold
Top view of upper intake, wouldn't the lettering look hot with yelo paint? (the spelling is an inside joke...)
Parker even wanted to keep his p/s, might not see this, but at least it will look hot.
Took the alternator apart to clean it up
This is going to look good trimmed in yelo....
Bahn Brenner Fuel Rail, what an expensive chunk of aluminum
Sure does look nice though, no, that is not the FPR we will be using.
Digi1 ECU
Cartech Rising rate Fuel pressure regulator, another expensive chunk of aluminum