Well, it has taken me a bit longer to get this project going than I thought.  Here are the latest pictures I have.  The car is currently at my buddies fabrication shop making room for the intercooler and running intercooler piping.  The car had a few parts stolen off it while it was moved from my old shop that I closed down in september.  The throttlebody adaptor was stolen along with the throttlbody.  I sourced a new T/B from the vortex and built a new adaptor.  After the fab process, it will be powder coated also.  The cold start vavle was removed and a 1/2" nipple with 3/8" pipe thread was screwed into the intake for the ISV.  The bottom pic is end on of the intercooler core.  It it going to be tanked and installed behind the grill and in between the headlights.